Flat Horn Bench Anvil — Cast Steel, 1.7 kg, 16.5 x 9.5 x 5.7 cm, Polished Face and Horn
£24.99
Sale price £24.99Regular price
Secure checkout
Enough mass to take real hammer blows without walking across the bench, in a footprint that still fits a jewellers bench. For jewellers, silversmiths and small-scale metalwork.
Cast steel, approx. 1.7 kg (3.5 lb)
16.5 x 9.5 x 5.7 cm (6.5 x 3.75 x 2.25 inch)
Polished flat face for flattening and planishing; flat horn for bending and forming curves
Black painted body, waisted base for clamping or screwing down
Approx. 1700 g
Built for: forging ring shanks, forming bangles over the horn, riveting and texturing. Smaller mini horn anvils are listed separately.
In the box: 1 x bench anvil.
Only 5 left at the benchSame-day Birmingham dispatch on weekday orders before 2pm.
For most bench work, 4–8 oz is the sweet spot. Lighter hammers (2–4 oz) suit fine detail and chasing punches; 6–8 oz suits forging and texture work. Avoid anything over 12 oz unless you specifically need a raising hammer.
Can I use this on annealed silver and copper?
Yes — these hammers are designed for non-ferrous metals: silver (sterling, fine, britannia), copper, brass, bronze, and aluminium. The polished face will not transfer marks to clean annealed stock when used correctly. For mild steel work, use a separate hammer.
How should I care for it?
Wipe the face down after each session to prevent any tarnish from work residue marking your next piece. If the head develops nicks, polish them out with fine-grit emery and a buffing mop — a marked hammer face transfers marks to your work.
What is in the box?
One hammer with the head and handle fitted, ready for the bench. Polished faces are protected with a thin oil film — wipe before first use.
Drop your email for a WELCOME5 code — £5 off orders over £30, plus monthly bench-tested tool picks and buying guides from our Birmingham workshop. About one email a month, no spam.
Almost there
Use code WELCOME5 at checkout
£5 off your first order over £30. Check your inbox and confirm your subscription to join the monthly Bench Journal.
Cookies. Essential cookies keep the shop running; with your consent we also use analytics & personalisation cookies to improve it.
Privacy policy · change anytime in the footer.
Repoussé & Chasing Hammer — 32mm Polished Dome Head, Wood Handle, Silversmith Metalwork £9.99
Dapping & Doming Block — 1 x Heavy Duty Brass, 2.0 Inch Metal Shaping Tool for Beading £29.99
Texturing Hammer, Narrow Head — Metal Forming Tool for Silversmithing and Repoussé Work £11.99
Non-Marring Forming Mallet — Teflon Hammer with Wedge and Cone Heads for Jewellery Shaping £14.99
