Doming & Shaping Stake — Wood Base, 9 Interchangeable Nylon Tips, for Metal Clay
£19.99
Sale price £19.99Regular price
Secure checkout
Forming metal clay over a bare steel stake risks bruising soft, part-dried work; this stake takes the opposite approach. Nine interchangeable nylon tips in assorted shapes give a non-marring surface for shaping, doming and detailing — swap profiles as the piece develops, from broad curves to finer detail. If doming is new to you, our guide to forming domes and beads covers the fundamentals.
The stake sits on a stable wooden base that keeps it planted while both hands guide the work, and the included Allen key turns a tip change into a few seconds' pause rather than an interruption.
Wood-based forming stake for stable working
9 interchangeable nylon tips in assorted shapes
Non-marring — ideal for metal clay and soft metals
For most bench work, 4–8 oz is the sweet spot. Lighter hammers (2–4 oz) suit fine detail and chasing punches; 6–8 oz suits forging and texture work. Avoid anything over 12 oz unless you specifically need a raising hammer.
Can I use this on annealed silver and copper?
Yes — these hammers are designed for non-ferrous metals: silver (sterling, fine, britannia), copper, brass, bronze, and aluminium. The polished face will not transfer marks to clean annealed stock when used correctly. For mild steel work, use a separate hammer.
How should I care for it?
Wipe the face down after each session to prevent any tarnish from work residue marking your next piece. If the head develops nicks, polish them out with fine-grit emery and a buffing mop — a marked hammer face transfers marks to your work.
What is in the box?
One hammer with the head and handle fitted, ready for the bench. Polished faces are protected with a thin oil film — wipe before first use.
Drop your email for a WELCOME5 code — £5 off orders over £30, plus monthly bench-tested tool picks and buying guides from our Birmingham workshop. About one email a month, no spam.
Almost there
Use code WELCOME5 at checkout
£5 off your first order over £30. Check your inbox and confirm your subscription to join the monthly Bench Journal.
Cookies. Essential cookies keep the shop running; with your consent we also use analytics & personalisation cookies to improve it.
Privacy policy · change anytime in the footer.
Repoussé & Chasing Hammer — 32mm Polished Dome Head, Wood Handle, Silversmith Metalwork £9.99
Dapping & Doming Block — 1 x Heavy Duty Brass, 2.0 Inch Metal Shaping Tool for Beading £29.99
Texturing Hammer, Narrow Head — Metal Forming Tool for Silversmithing and Repoussé Work £11.99
Non-Marring Forming Mallet — Teflon Hammer with Wedge and Cone Heads for Jewellery Shaping £14.99
