Leather Sand Bag, 10 x 10 Inch Square — Unfilled, Triple Stitched, for Stamping, Chasing and Engraving Support
£17.99
Sale price £17.99Regular price
Secure checkout
A leather cushion that holds the work still. Filled with sand it gives a firm, dead surface for stamping and chasing, absorbs the blow, and keeps the noise down on a shared bench.
10 x 10 Inch Square, about 25 x 25 cm
Fine leather, black, triple-stitched seams
Supplied unfilled: fill with dry sand or lead shot through the flap
Takes about 1.5 kg of sand when full
Approx. 30 g empty
Built for: letter and design stamping on blanks, chasing and repoussé, engraving small pieces, and steadying a dapping block or bench anvil. The square shape sits flush against a bench block or the edge of the bench. The other sizes and the steel bench blocks are listed separately.
In the box: 1 x leather sand bag, unfilled.
Last 2 at the benchOrder before 2pm Mon–Fri and we aim to dispatch it from Birmingham today.
For most bench work, 4–8 oz is the sweet spot. Lighter hammers (2–4 oz) suit fine detail and chasing punches; 6–8 oz suits forging and texture work. Avoid anything over 12 oz unless you specifically need a raising hammer.
Can I use this on annealed silver and copper?
Yes — these hammers are designed for non-ferrous metals: silver (sterling, fine, britannia), copper, brass, bronze, and aluminium. The polished face will not transfer marks to clean annealed stock when used correctly. For mild steel work, use a separate hammer.
How should I care for it?
Wipe the face down after each session to prevent any tarnish from work residue marking your next piece. If the head develops nicks, polish them out with fine-grit emery and a buffing mop — a marked hammer face transfers marks to your work.
What is in the box?
One hammer with the head and handle fitted, ready for the bench. Polished faces are protected with a thin oil film — wipe before first use.
Drop your email for a WELCOME5 code — £5 off orders over £30, plus monthly bench-tested tool picks and buying guides from our Birmingham workshop. About one email a month, no spam.
Almost there
Use code WELCOME5 at checkout
£5 off your first order over £30. Check your inbox and confirm your subscription to join the monthly Bench Journal.
Cookies. Essential cookies keep the shop running; with your consent we also use analytics & personalisation cookies to improve it.
Privacy policy · change anytime in the footer.
Repoussé & Chasing Hammer — 32mm Polished Dome Head, Wood Handle, Silversmith Metalwork £9.99
Dapping & Doming Block — 1 x Heavy Duty Brass, 2.0 Inch Metal Shaping Tool for Beading £29.99
Texturing Hammer, Narrow Head — Metal Forming Tool for Silversmithing and Repoussé Work £11.99
Non-Marring Forming Mallet — Teflon Hammer with Wedge and Cone Heads for Jewellery Shaping £14.99
