Needle Hole Punch Pliers, 1 mm — 6.25 Inch Stainless Steel, Orange Grips, for Sheet, Leather and Stone Removal
£14.99
Sale price £14.99Regular price
Secure checkout
A fine 1 mm punch on a plier frame: one squeeze, one clean round hole, no drill and no burr. For jewellers, leatherworkers and crafters.
1 mm needle punch with a hardened anvil
6.25 inch (15.9 cm) long, stainless steel, orange sprung grips
Single-handed use, reaches about 8 mm in from an edge
Also used by setters to push a stone out of a damaged setting
Approx. 150 g
Built for: rivet holes in thin sheet, holes in leather straps and fabric, and starting a hole for a jump ring. Larger 1.5 mm and rotary punches are listed separately.
In the box: 1 x hole punch pliers.
Only 5 left at the benchSame-day Birmingham dispatch on weekday orders before 2pm.
Our flat-, snipe-, and round-nose pliers have polished interior jaws — they will not mark cleanly annealed precious-metal wire when used with normal grip pressure. For absolutely no-mark work on finished pieces, wrap the jaws with masking tape or nylon-jaw covers (sold separately).
Can these cut hardened wire?
Tungsten-carbide-tipped cutters in this collection handle hardened steel up to spring temper. Standard side cutters are for non-ferrous (silver, gold, copper, brass) up to half-hard. Check the product spec for the cutting capacity.
What is the difference between parallel and standard pliers?
Standard pliers pivot on a single point — the jaws scissor open and grip strongest at the tip. Parallel-action pliers stay perfectly parallel through the full opening, giving equal grip pressure across the whole jaw face. Parallel models are higher-precision (better for wire-wrapping and dead-soft annealed wire) but cost more.
Do they come spring-loaded?
Most of our bench pliers ship spring-loaded for one-handed operation. Where the spring is removable, the product description notes it. Spring tension is set for all-day comfort, not maximum grip.
Drop your email for a WELCOME5 code — £5 off orders over £30, plus monthly bench-tested tool picks and buying guides from our Birmingham workshop. About one email a month, no spam.
Almost there
Use code WELCOME5 at checkout
£5 off your first order over £30. Check your inbox and confirm your subscription to join the monthly Bench Journal.
Cookies. Essential cookies keep the shop running; with your consent we also use analytics & personalisation cookies to improve it.
Privacy policy · change anytime in the footer.
Combination Wire Pliers — Round & Flat Nose in One, 140 mm, Polished Steel Handles £7.99
Diagonal Wire Cutters, 5 Inch Tungsten Carbide Tips — Cuts to 12 Gauge/2.05 mm, PVC Handle £17.99
Polishing & Filing Grip Pliers, Leather Jaws — Ring Holding, Stainless Steel, 15 cm £9.99
Jump Ring & Pipe Holding Pliers with Jaw Hole — Flat Nose, Stainless Steel, 130 mm £7.99
