Soldering Tripod & Mesh Screen — 9 Inch Stand, 6 Inch Wire Mesh, for Bunsen Burner and Torch
£9.99
Sale price £9.99Regular price
Secure checkout
Raises the work over a bunsen or torch flame so heat comes up through the mesh, evenly and from below. For soldering, annealing, enamelling and sweating joints.
9 inch (23 cm) tall: more room for a burner underneath than the 7 inch stand
6 inch (15 cm) square steel wire mesh screen
Cast ring top with three screw-in steel legs, packs flat
Steel throughout, takes direct flame
Approx. 200 g
Built for: heating from beneath: bring a piece up to soldering heat, anneal sheet and wire, or fire small enamels. A 7 inch height is listed separately.
In the box: 1 x tripod ring, 3 x legs, 1 x mesh screen.
Only 5 left at the benchSame-day Birmingham dispatch on weekday orders before 2pm.
Stainless steel cross-lock and standard tweezers handle bench-torch heat (1500 °C+) on the working tips repeatedly without damage — the steel just discolours. Titanium-tip soldering picks specifically will not bond to silver or gold solder, which standard steel will after enough use.
Cross-lock or reverse-action — which one?
Cross-lock (self-locking on close) grips your work without finger pressure — best for holding a piece for soldering. Reverse-action (locks open, releases on squeeze) holds a piece in position when you want to walk away. Most benches end up owning both.
What is the third-hand base for?
A heavy base with one or two cross-lock arms keeps your work stable while you set up solder pallions or apply heat. Frees both your hands for the torch and pick. The heavier the base, the steadier the work — aim for 1 kg+ for medium bench-torch work.
Can I solder on a ceramic board?
Yes — ceramic boards reflect heat back into the work and do not pit the way old fire-bricks do. For sterling work, a charcoal block underneath gives a reducing atmosphere that helps prevent firescale.
Drop your email for a WELCOME5 code — £5 off orders over £30, plus monthly bench-tested tool picks and buying guides from our Birmingham workshop. About one email a month, no spam.
Almost there
Use code WELCOME5 at checkout
£5 off your first order over £30. Check your inbox and confirm your subscription to join the monthly Bench Journal.
Cookies. Essential cookies keep the shop running; with your consent we also use analytics & personalisation cookies to improve it.
Privacy policy · change anytime in the footer.
Soldering Block Tray — Charcoal Holder, Anti-Magnetic Stainless Steel, 120 × 50 mm £7.99
Pointed Tip Tweezers, 5-S, 5 Inch — Magnetic Anti-Acid Stainless Steel, Watch Repairs £3.99
Fine Point Serrated Tweezers, 6-1/2 in — Stainless Steel for Diamond, Gemstone & Bead Repair £3.99
Diamond, Gem & Bead Pick-Up Tweezers — Stainless Steel, 16.5 cm, Medium Point, Serrated Jaws £3.99
