Grip with the flat jaw, form against the half-round — a single plier that both holds wire securely and eases it into smooth curves without crimping or marring. It is the tool to reach for when forming loops, bending jump rings and shaping frames.
Forged from polished stainless steel, so it resists corrosion and wears well over a long working life. The smooth polished handles stay comfortable through detailed sessions, and at 5.5 inches (14 cm) the plier sits close to the fingers for controlled, intricate bench work.
One flat jaw and one half-round jaw — grips and forms wire in a single tool
Ideal for wire forming, beading, loop-making and general jewellery work
Polished stainless steel — corrosion-resistant and hard-wearing
Smooth polished handles for a comfortable, secure grip
5.5 inch (14 cm) — sized for detailed, intricate bench work
Our flat-, snipe-, and round-nose pliers have polished interior jaws — they will not mark cleanly annealed precious-metal wire when used with normal grip pressure. For absolutely no-mark work on finished pieces, wrap the jaws with masking tape or nylon-jaw covers (sold separately).
Can these cut hardened wire?
Tungsten-carbide-tipped cutters in this collection handle hardened steel up to spring temper. Standard side cutters are for non-ferrous (silver, gold, copper, brass) up to half-hard. Check the product spec for the cutting capacity.
What is the difference between parallel and standard pliers?
Standard pliers pivot on a single point — the jaws scissor open and grip strongest at the tip. Parallel-action pliers stay perfectly parallel through the full opening, giving equal grip pressure across the whole jaw face. Parallel models are higher-precision (better for wire-wrapping and dead-soft annealed wire) but cost more.
Do they come spring-loaded?
Most of our bench pliers ship spring-loaded for one-handed operation. Where the spring is removable, the product description notes it. Spring tension is set for all-day comfort, not maximum grip.
Drop your email for a WELCOME5 code — £5 off orders over £30, plus monthly bench-tested tool picks and buying guides from our Birmingham workshop. About one email a month, no spam.
Almost there
Use code WELCOME5 at checkout
£5 off your first order over £30. Check your inbox and confirm your subscription to join the monthly Bench Journal.
Cookies. Essential cookies keep the shop running; with your consent we also use analytics & personalisation cookies to improve it.
Privacy policy · change anytime in the footer.
Combination Wire Pliers — Round & Flat Nose in One, 140 mm, Polished Steel Handles £7.99
Diagonal Wire Cutters, 5 Inch Tungsten Carbide Tips — Cuts to 12 Gauge/2.05 mm, PVC Handle £17.99
Polishing & Filing Grip Pliers, Leather Jaws — Ring Holding, Stainless Steel, 15 cm £9.99
Jump Ring & Pipe Holding Pliers with Jaw Hole — Flat Nose, Stainless Steel, 130 mm £7.99
