Bone shape blank cutter set from above on linen, seven bone-shaped steel punches in a row in the four-bolt die block

Pet Tag Blank Cutter — 7-Piece Bone Shape Steel Disc Punch Set for Metal Jewellery Stamping

£139.99
£139.99
Skip to product information
Bone shape blank cutter set from above on linen, seven bone-shaped steel punches in a row in the four-bolt die block
  • Bone shape blank cutter set from above on linen, seven bone-shaped steel punches in a row in the four-bolt die block
  • Line drawing of the seven bone blank outlines with their lengths, from 31.24 mm down to 8.08 mm
  • Bone shape blank cutter set from directly above on white, the seven graduated punches flush in the steel block
  • Bone shape blank cutter set from an angle, seven punches standing proud of the block with the largest nearest
  • Bone shape blank cutter set from the opposite corner, showing the slot in the side of the die block
  • Bone shape blank cutter set from above on linen, seven bone-shaped steel punches in a row in the four-bolt die block
  • Line drawing of the seven bone blank outlines with their lengths, from 31.24 mm down to 8.08 mm
  • Bone shape blank cutter set from directly above on white, the seven graduated punches flush in the steel block
  • Bone shape blank cutter set from an angle, seven punches standing proud of the block with the largest nearest
  • Bone shape blank cutter set from the opposite corner, showing the slot in the side of the die block
Pet Tag Blank Cutter — 7-Piece Bone Shape Steel Disc Punch Set for Metal Jewellery Stamping

Pet Tag Blank Cutter — 7-Piece Bone Shape Steel Disc Punch Set for Metal Jewellery Stamping

£139.99
£139.99
Secure checkout
American Express Apple Pay Bancontact Diners Club Discover Google Pay Klarna Maestro Mastercard MB WAY PayPal Satispay Shop Pay Union Pay USDC Visa

Sawing bone-shaped tags by hand means tracing, piercing and filing every single blank. This set replaces all of that with one hammer strike: drop silver, copper or brass sheet into the die block, seat a punch, and a clean-edged bone blank falls out — the same profile every time, which is what a production run of pet tags or charms actually needs.

The seven punches step up in graduated sizes, from small charm blanks to full-sized tags, and both punches and die block are hardened steel for a long working life on non-ferrous sheet. A time-saver for engravers and jewellers doing personalised tag work, and for anyone cutting matched bone-shaped components in quantity.

  • Includes seven punches in graduated sizes for small charms through to full-sized tags.
  • Hardened steel construction produces clean-edged blanks with a single hammer strike.
  • Suitable for cutting non-ferrous sheet metals, including silver, copper, and brass.
  • Eliminates manual sawing, ensuring consistent profiles for production runs.

Who it's for

Primarily for UK jewellers and engravers who specialise in creating personalised pet tags and charms. Also suited for craftspeople and metalsmiths needing to produce multiple bone-shaped components for larger jewellery or decorative projects.

Specifications

  • Material: Hardened Steel
  • Set Contents: 1x Die Block, 7x Bone-Profile Punches

Free UK delivery from £30 · Same-day dispatch target for orders before 2pm Mon–Fri · 30-day returns
Weight 2000 g

Common questions at the bench

What metal and thickness can it cut?
Check this product's description for the metals and any maximum thickness it gives, and stay within them. If it gives none, keep to thin, soft, non-ferrous sheet. Cutting sheet that is harder or thicker than the cutter is made for can chip or blunt the punches and the die.
How do I cut a clean blank?
Stand the cutter on a solid, flat surface such as a steel bench block and check the sheet lies flat where it should. Set the punch with its cutting end to the metal and strike it squarely and firmly with a hammer, or a mallet with a hard face; a nylon, wooden or rubber face can be dented by the punch. One firm, square blow gives a cleaner edge than several light or glancing ones.
Will the blank need finishing?
Check each blank. Smooth any burr or sharp edge with a file or fine abrasive paper before the piece is worn or finished, and if a blank has bowed slightly in the cut, flatten it with a mallet on a bench block.
How should I look after it?
Use it only on the sheet it is made for, wipe the punches and die clean after use and store them dry, with the cutting edges kept from knocking against other tools. If a punch sticks, tap it back out straight rather than levering or twisting it.

More from Hammers & Forming

View all 159 →
  1. Repoussé chasing hammer with polished 32 mm dome face and ball peen on a wooden handle
    Repoussé & Chasing Hammer — 32mm Polished Dome Head, Wood Handle, Silversmith Metalwork £9.99
  2. Heavy duty 2-inch brass dapping block for metal shaping and silversmithing
    Dapping & Doming Block — 1 x Heavy Duty Brass, 2.0 Inch Metal Shaping Tool for Beading £29.99
  3. Narrow head texturing hammer with polished double-ended head and dark wooden handle, lying on linen
    Texturing Hammer, Narrow Head — Metal Forming Tool for Silversmithing and Repoussé Work £11.99
  4. Non-marring forming mallet with a long white Teflon head, wedge at one end and cone at the other, wooden handle
    Non-Marring Forming Mallet — Teflon Hammer with Wedge and Cone Heads for Jewellery Shaping £14.99

You may also like