9-hole disc cutter set from above, nine shaped steel punches seated in the block: heart, star, flower, oval and more

Multi-Shape Disc Cutter — 9 Hole Steel Set, 1/2″–5/8″ Range, Assorted Pattern Templates

$149.00
$149.00
Skip to product information
9-hole disc cutter set from above, nine shaped steel punches seated in the block: heart, star, flower, oval and more
  • 9-hole disc cutter set from above, nine shaped steel punches seated in the block: heart, star, flower, oval and more
  • Size chart for the 9-hole disc cutter set, outlines of the nine shapes with sizes from 8 x 12 mm to 16 x 17 mm
  • 9-hole disc cutter block from directly above on a white background, all nine punches in place
  • 9-hole disc cutter set at an angle, the shaped punches standing proud of the two-part steel block
  • 9-hole disc cutter shapes shown as holes in a copper-coloured plate: square, heart, teardrop, star, oval, flower and more
  • 9-hole disc cutter set from above, nine shaped steel punches seated in the block: heart, star, flower, oval and more
  • Size chart for the 9-hole disc cutter set, outlines of the nine shapes with sizes from 8 x 12 mm to 16 x 17 mm
  • 9-hole disc cutter block from directly above on a white background, all nine punches in place
  • 9-hole disc cutter set at an angle, the shaped punches standing proud of the two-part steel block
  • 9-hole disc cutter shapes shown as holes in a copper-coloured plate: square, heart, teardrop, star, oval, flower and more
Multi-Shape Disc Cutter — 9 Hole Steel Set, 1/2″–5/8″ Range, Assorted Pattern Templates

Multi-Shape Disc Cutter — 9 Hole Steel Set, 1/2″–5/8″ Range, Assorted Pattern Templates

$149.00
$149.00
Secure checkout
American Express Apple Pay Bancontact Diners Club Discover Google Pay Klarna Maestro Mastercard MB WAY PayPal Satispay Shop Pay Union Pay USDC Visa

Punch clean, consistent metal shapes for charms and pendants with this versatile nine-hole disc cutter set.

What it does

This hardened steel multi-disc cutter allows you to stamp precise shapes directly from sheet metal using a hammer. The integrated nine-punch die block means you can switch between popular forms without changing tools. Each punch is precisely machined to deliver sharp, clean edges, producing ready-to-solder blanks ideal for immediate bench work and finishing.

How to use it

  • Place sheet metal on the die block.
  • Strike the chosen punch firmly with a hammer.
  • Remove the stamped shape and clean the die.

Who it's for

An essential tool for UK bench jewellers, silversmiths, and serious hobbyists. This disc cutter streamlines the creation of consistent charms, earring blanks, and decorative elements, replacing tedious hand-cutting or multiple single-shape punches.

What's in the box

One 9-hole multi steel disc cutter set.

Our promise

Dispatched from the UK. Same-day dispatch target for orders before 2pm Mon–Fri. Free UK delivery on orders of £30 or more. 30-day returns — try it at the bench.
Weight 2000 g

Common questions at the bench

What metal and thickness can it cut?
Check this product's description for the metals and any maximum thickness it gives, and stay within them. If it gives none, keep to thin, soft, non-ferrous sheet. Cutting sheet that is harder or thicker than the cutter is made for can chip or blunt the punches and the die.
How do I cut a clean blank?
Stand the cutter on a solid, flat surface such as a steel bench block and check the sheet lies flat where it should. Set the punch with its cutting end to the metal and strike it squarely and firmly with a hammer, or a mallet with a hard face; a nylon, wooden or rubber face can be dented by the punch. One firm, square blow gives a cleaner edge than several light or glancing ones.
Will the blank need finishing?
Check each blank. Smooth any burr or sharp edge with a file or fine abrasive paper before the piece is worn or finished, and if a blank has bowed slightly in the cut, flatten it with a mallet on a bench block.
How should I look after it?
Use it only on the sheet it is made for, wipe the punches and die clean after use and store them dry, with the cutting edges kept from knocking against other tools. If a punch sticks, tap it back out straight rather than levering or twisting it.

More from Hammers & Forming

View all 159 →
  1. Repoussé chasing hammer with polished 32 mm dome face and ball peen on a wooden handle
    Repoussé & Chasing Hammer — 32mm Polished Dome Head, Wood Handle, Silversmith Metalwork $12.00
  2. Heavy duty 2-inch brass dapping block for metal shaping and silversmithing
    Dapping & Doming Block — 1 x Heavy Duty Brass, 2.0 Inch Metal Shaping Tool for Beading $35.00
  3. Narrow head texturing hammer with polished double-ended head and dark wooden handle, lying on linen
    Texturing Hammer, Narrow Head — Metal Forming Tool for Silversmithing and Repoussé Work $14.00
  4. Non-marring forming mallet with a long white Teflon head, wedge at one end and cone at the other, wooden handle
    Non-Marring Forming Mallet — Teflon Hammer with Wedge and Cone Heads for Jewellery Shaping $18.00

You may also like