Chasing hammer head with a 22 mm full domed face

Chasing Hammer — 22 mm Full Domed Face, Hickory Handle, for Chasing, Repoussé & Metal Forming

£14.99
£14.99
Skip to product information
Chasing hammer head with a 22 mm full domed face
  • Chasing hammer head with a 22 mm full domed face
  • Chasing hammer head, second view
  • Chasing hammer with alloy steel head and hickory wood handle
  • Chasing hammer head with a 22 mm full domed face
  • Chasing hammer head, second view
  • Chasing hammer with alloy steel head and hickory wood handle
Chasing Hammer — 22 mm Full Domed Face, Hickory Handle, for Chasing, Repoussé & Metal Forming

Chasing Hammer — 22 mm Full Domed Face, Hickory Handle, for Chasing, Repoussé & Metal Forming

£14.99
£14.99
Secure checkout
American Express Apple Pay Bancontact Diners Club Discover Google Pay Klarna Maestro Mastercard MB WAY PayPal Shop Pay Union Pay USDC Visa

A chasing hammer with a 22 mm fully domed striking face that shapes and forms metal without leaving flat marks.

  • 22 mm full domed face for controlled, even strikes
  • Alloy steel head
  • Balanced hickory wood handle reduces hand fatigue
  • Approx. 25 cm overall
  • For silver, copper and gold
  • Approx. 130 g

Built for: chasing, repoussé, metal forming and curving sheet metal across jewellery and craft projects.

In the box: 1 chasing hammer.
Only 5 left at the bench Same-day dispatch target for orders before 2pm Mon–Fri.
Weight 130 g

Common questions at the bench

What weight hammer should I start with?
For most bench work, 4–8 oz is the sweet spot. Lighter hammers (2–4 oz) suit fine detail and chasing punches; 6–8 oz suits forging and texture work. Avoid anything over 12 oz unless you specifically need a raising hammer.
Can I use this on annealed silver and copper?
Yes — these hammers are designed for non-ferrous metals: silver (sterling, fine, britannia), copper, brass, bronze, and aluminium. The polished face will not transfer marks to clean annealed stock when used correctly. For mild steel work, use a separate hammer.
How should I care for it?
Wipe the face down after each session to prevent any tarnish from work residue marking your next piece. If the head develops nicks, polish them out with fine-grit emery and a buffing mop — a marked hammer face transfers marks to your work.
What is in the box?
One hammer with the head and handle fitted, ready for the bench. Polished faces are protected with a thin oil film — wipe before first use.

More from Hammers & Forming

View all 159 →
  1. Repoussé chasing hammer with polished 32 mm dome face and ball peen on a wooden handle
    Repoussé & Chasing Hammer — 32mm Polished Dome Head, Wood Handle, Silversmith Metalwork £9.99
  2. Heavy duty 2-inch brass dapping block for metal shaping and silversmithing
    Dapping & Doming Block — 1 x Heavy Duty Brass, 2.0 Inch Metal Shaping Tool for Beading £29.99
  3. Narrow head texturing hammer with polished double-ended head and dark wooden handle, lying on linen
    Texturing Hammer, Narrow Head — Metal Forming Tool for Silversmithing and Repoussé Work £11.99
  4. Non-marring forming mallet with a long white Teflon head, wedge at one end and cone at the other, wooden handle
    Non-Marring Forming Mallet — Teflon Hammer with Wedge and Cone Heads for Jewellery Shaping £14.99

You may also like