Teardrop blank punch set, the die block from above with four teardrop punches seated, two large and two small

Teardrop Blank Punch Set for Sheet Metal — 4 Steel Cutters, 10–33 mm, Jewellery Patterns

£99.99
£99.99
Skip to product information
Teardrop blank punch set, the die block from above with four teardrop punches seated, two large and two small
  • Teardrop blank punch set, the die block from above with four teardrop punches seated, two large and two small
  • Teardrop blank punch set size chart drawing the four shapes and listing No 1 to 4 from 15 x 10 mm to 22 x 33 mm
  • Teardrop blank punch set block at an angle with the four punches seated
  • Teardrop blank punch set block seen at an angle with the four teardrop punches seated, on a pale textured background
  • Teardrop blank punch set from directly above with the four punches in their die, white background
  • Teardrop blank punch set, the die block from above with four teardrop punches seated, two large and two small
  • Teardrop blank punch set size chart drawing the four shapes and listing No 1 to 4 from 15 x 10 mm to 22 x 33 mm
  • Teardrop blank punch set block at an angle with the four punches seated
  • Teardrop blank punch set block seen at an angle with the four teardrop punches seated, on a pale textured background
  • Teardrop blank punch set from directly above with the four punches in their die, white background
Teardrop Blank Punch Set for Sheet Metal — 4 Steel Cutters, 10–33 mm, Jewellery Patterns

Teardrop Blank Punch Set for Sheet Metal — 4 Steel Cutters, 10–33 mm, Jewellery Patterns

£99.99
£99.99
Secure checkout
American Express Apple Pay Bancontact Diners Club Discover Google Pay Klarna Maestro Mastercard MB WAY PayPal Satispay Shop Pay Union Pay USDC Visa

Craft consistent teardrop blanks with this professional steel disc cutter set, ideal for precise metal shaping at the jeweller's bench.

What it does

This tool cleanly shears non-ferrous sheet metal, creating perfectly uniform teardrop shapes for components. The hardened steel punches and die plates are precisely machined to deliver sharp, burr-free cuts with every strike. Its robust two-plate block construction ensures the metal is fully supported, leading to clean, sheared edges that minimise post-cutting finishing work.

How to use it

  • Position metal sheet over the die opening.
  • Strike the punch firmly with a mallet.
  • Release the cut blank from the die.

Who it's for

A fundamental tool for UK bench jewellers and silversmiths creating collections of teardrop earrings, pendants, or charms. It replaces tedious hand-cutting and filing, offering speed and consistency for intermediate to professional makers working with silver, gold, copper, or brass.

What's in the box

1x Steel cutting block, 4x Teardrop punches (10mm, 15mm, 20mm, 33mm)

Our promise

Dispatched from the UK. Same-day dispatch target for orders before 2pm Mon–Fri. Free UK delivery on orders of £30 or more. 30-day returns — try it at the bench.
Weight 1400 g

Common questions at the bench

What metal and thickness can it cut?
Check this product's description for the metals and any maximum thickness it gives, and stay within them. If it gives none, keep to thin, soft, non-ferrous sheet. Cutting sheet that is harder or thicker than the cutter is made for can chip or blunt the punches and the die.
How do I cut a clean blank?
Stand the cutter on a solid, flat surface such as a steel bench block and check the sheet lies flat where it should. Set the punch with its cutting end to the metal and strike it squarely and firmly with a hammer, or a mallet with a hard face; a nylon, wooden or rubber face can be dented by the punch. One firm, square blow gives a cleaner edge than several light or glancing ones.
Will the blank need finishing?
Check each blank. Smooth any burr or sharp edge with a file or fine abrasive paper before the piece is worn or finished, and if a blank has bowed slightly in the cut, flatten it with a mallet on a bench block.
How should I look after it?
Use it only on the sheet it is made for, wipe the punches and die clean after use and store them dry, with the cutting edges kept from knocking against other tools. If a punch sticks, tap it back out straight rather than levering or twisting it.

More from Hammers & Forming

View all 159 →
  1. Repoussé chasing hammer with polished 32 mm dome face and ball peen on a wooden handle
    Repoussé & Chasing Hammer — 32mm Polished Dome Head, Wood Handle, Silversmith Metalwork £9.99
  2. Heavy duty 2-inch brass dapping block for metal shaping and silversmithing
    Dapping & Doming Block — 1 x Heavy Duty Brass, 2.0 Inch Metal Shaping Tool for Beading £29.99
  3. Narrow head texturing hammer with polished double-ended head and dark wooden handle, lying on linen
    Texturing Hammer, Narrow Head — Metal Forming Tool for Silversmithing and Repoussé Work £11.99
  4. Non-marring forming mallet with a long white Teflon head, wedge at one end and cone at the other, wooden handle
    Non-Marring Forming Mallet — Teflon Hammer with Wedge and Cone Heads for Jewellery Shaping £14.99

You may also like