Shock-Absorbing Base — Replacement Rubber Block for Steel & Rubber Combination Bench Anvil
£6.99
Sale price £6.99Regular price
Secure checkout
Stamping and hammering on a bare steel block rings through the bench and the room; the rubber underneath is what keeps the noise and bounce in check. This replacement base sits under a steel-and-rubber combination anvil block, deadening the din and absorbing shock so the blow goes into the work rather than the bench. It pairs well with a considered choice of bench hammer.
The rubber protects both bench top and workpiece, and its non-slip face stops the block creeping across the bench mid-pattern. If your original base has hardened or split, this puts the set back to work.
Replacement rubber base for a combination anvil block
For most bench work, 4–8 oz is the sweet spot. Lighter hammers (2–4 oz) suit fine detail and chasing punches; 6–8 oz suits forging and texture work. Avoid anything over 12 oz unless you specifically need a raising hammer.
Can I use this on annealed silver and copper?
Yes — these hammers are designed for non-ferrous metals: silver (sterling, fine, britannia), copper, brass, bronze, and aluminium. The polished face will not transfer marks to clean annealed stock when used correctly. For mild steel work, use a separate hammer.
How should I care for it?
Wipe the face down after each session to prevent any tarnish from work residue marking your next piece. If the head develops nicks, polish them out with fine-grit emery and a buffing mop — a marked hammer face transfers marks to your work.
What is in the box?
One hammer with the head and handle fitted, ready for the bench. Polished faces are protected with a thin oil film — wipe before first use.
Drop your email for a WELCOME5 code — £5 off orders over £30, plus monthly bench-tested tool picks and buying guides from our Birmingham workshop. About one email a month, no spam.
Almost there
Use code WELCOME5 at checkout
£5 off your first order over £30. Check your inbox and confirm your subscription to join the monthly Bench Journal.
Cookies. Essential cookies keep the shop running; with your consent we also use analytics & personalisation cookies to improve it.
Privacy policy · change anytime in the footer.
Repoussé & Chasing Hammer — 32mm Polished Dome Head, Wood Handle, Silversmith Metalwork £9.99
Dapping & Doming Block — 1 x Heavy Duty Brass, 2.0 Inch Metal Shaping Tool for Beading £29.99
Texturing Hammer, Narrow Head — Metal Forming Tool for Silversmithing and Repoussé Work £11.99
Non-Marring Forming Mallet — Teflon Hammer with Wedge and Cone Heads for Jewellery Shaping £14.99
