A replacement rubber base for a steel-and-rubber combination bench anvil block. The rubber side deadens noise and absorbs shock when stamping and hammering, protecting both the bench and the workpiece.
Replacement rubber base for a combination anvil block
Deadens noise and absorbs hammering shock
Protects the bench and the workpiece
Non-slip on the bench top
For stamping, hammering and forming
Out at the bench right now
Drop your email and we'll let you know the moment it's back on the shelf. No marketing — just the restock notification.
For most bench work, 4–8 oz is the sweet spot. Lighter hammers (2–4 oz) suit fine detail and chasing punches; 6–8 oz suits forging and texture work. Avoid anything over 12 oz unless you specifically need a raising hammer.
Can I use this on annealed silver and copper?
Yes — these hammers are designed for non-ferrous metals: silver (sterling, fine, britannia), copper, brass, bronze, and aluminium. The polished face will not transfer marks to clean annealed stock when used correctly. For mild steel work, use a separate hammer.
How should I care for it?
Wipe the face down after each session to prevent any tarnish from work residue marking your next piece. If the head develops nicks, polish them out with fine-grit emery and a buffing mop — a marked hammer face transfers marks to your work.
What is in the box?
One hammer with the head and handle fitted, ready for the bench. Polished faces are protected with a thin oil film — wipe before first use.
Drop your email for a WELCOME5 code — £5 off orders over £30, plus monthly bench-tested tool picks and buying guides from our Birmingham workshop. About one email a month, no spam.
Almost there
Use code WELCOME5 at checkout
£5 off your first order over £30. Check your inbox and confirm your subscription to join the monthly Bench Journal.
Cookies. Essential cookies keep the shop running; with your consent we also use analytics & personalisation cookies to improve it.
Privacy policy · change anytime in the footer.
Chasing Hammer Jewellery Tool, 32mm Dome Head, Metal Silversmith Repousse Hammer with Wood Handle £9.99
1 x Heavy Duty Brass Doming Dapping Block, 2.0 Inch Metal Shaping Tool for Jewellery Making and Beading £29.99
Jewellery Making Texturing Hammer, Narrow Head Design, Metal Forming Tool for Silversmithing and Repousse Work £11.99
Wedge and Cone Head Teflon Mallet Hammer, Non-Marring Jewellery Forming and Shaping Tool £14.99
