This disc cutter set allows you to produce three sizes of detailed lion-shaped blanks from sheet metal. The set includes a solid steel die block and three corresponding punches, machined from hardened carbon tool steel for durability and a clean cut.
To use, simply place your sheet metal (up to 18 gauge) into the die's slot, position the desired punch, and strike it firmly with a mallet or hammer. For best results and to prolong the life of the cutting edges, we recommend using a cutting lubricant and annealing your metal beforehand.
The three included punches create blanks measuring approximately 39.7 x 22.8 mm, 30.8 x 17.7 mm, and 22.5 x 13.0 mm. This tool is ideal for creating unique pendants, charms, and decorative elements for jewellery or metalcraft projects.
Cuts clean lion-shaped blanks from non-ferrous sheet metal up to 18 gauge (1.02 mm).
Block and punches are machined from hardened and tempered high-carbon tool steel.
Includes three punch sizes: 39.7 mm, 30.8 mm, and 22.5 mm (approximate heights).
The solid steel die block measures approximately 76 x 76 mm (3 x 3 inches).
Punches feature a sharp cutting face and a bevelled end for striking with a hammer.
Only 5 left at the benchSame-day Birmingham dispatch on weekday orders before 2pm.
Our steel letter, number, and design punches are heat-treated to strike non-ferrous metals: silver (sterling, fine), copper, brass, bronze, aluminium, gold. Striking hardened steel will damage the face. For pewter and very soft alloys, use light strikes.
What size impression do I need?
1–2 mm for ring shanks and small pieces (initials, hallmark-style); 3–4 mm for pendant backs and signed plaques; 5 mm+ for presentation pieces and stamped jewellery components. Bigger is not always better — a clean small mark reads better than a struggle with an oversized one.
What do I strike it with?
A 1–2 lb brass mallet on a polished steel bench block. Do not use a steel hammer — it will deform the punch over time. One firm strike beats two soft ones for a clean impression.
How do I keep the punch sharp?
Polished punches stay sharp for thousands of strikes if you are hitting cleanly on a flat block. If the face starts blurring impressions, polish lightly with 600-grit emery, then a buffing mop on a polishing motor. Replace before the face deforms further.
Drop your email for a WELCOME5 code — £5 off orders over £30, plus monthly bench-tested tool picks and buying guides from our Birmingham workshop. About one email a month, no spam.
Almost there
Use code WELCOME5 at checkout
£5 off your first order over £30. Check your inbox and confirm your subscription to join the monthly Bench Journal.
Cookies. Essential cookies keep the shop running; with your consent we also use analytics & personalisation cookies to improve it.
Privacy policy · change anytime in the footer.
Steel Design Punch for 5.0 mm Five-Pointed Stars, 60 HRC Hardness £7.99
1 x Heavy Duty Brass Doming Dapping Block, 2.0 Inch Metal Shaping Tool for Jewellery Making and Beading £29.99
Wooden Stamp Holder Safety Block for Jewellery Making, Metal Marking, Round and Square Stamps, 4.1 x 4.1 x 4.1 cm £7.99
9 Inch Heavy Duty Large Double Ended Jewellery Making Forming Stake No 3, Hardened Steel, Synclastic and Anticlastic, Highly Polished £29.99
