Pendant Blank Cutter Set — Lion, 3 Steel Punches, 12-40 mm, Jewellery Sheet Metal
£99.99
Sale price £99.99Regular price
Secure checkout
A lion in three sizes — roughly 39.7 × 22.8 mm, 30.8 × 17.7 mm and 22.5 × 13.0 mm — punched straight from sheet with one firm strike each. Detail like this is tedious to cut by hand; here it repeats exactly, blank after blank, for pendants, charms and decorative metalwork.
The block (about 76 × 76 mm) and punches are hardened, tempered high-carbon tool steel. Each punch carries a sharp cutting face and a bevelled end for the mallet. Anneal your metal, keep it to 18 gauge (1.02 mm) or thinner, and use cutting fluid — the blanks then come away clean and ready for finishing.
Cuts clean lion-shaped blanks from non-ferrous sheet metal up to 18 gauge (1.02 mm).
Block and punches are machined from hardened and tempered high-carbon tool steel.
Includes three punch sizes: 39.7 mm, 30.8 mm, and 22.5 mm (approximate heights).
The solid steel die block measures approximately 76 x 76 mm (3 x 3 inches).
Punches feature a sharp cutting face and a bevelled end for striking with a hammer.
Our steel letter, number, and design punches are heat-treated to strike non-ferrous metals: silver (sterling, fine), copper, brass, bronze, aluminium, gold. Striking hardened steel will damage the face. For pewter and very soft alloys, use light strikes.
What size impression do I need?
1–2 mm for ring shanks and small pieces (initials, hallmark-style); 3–4 mm for pendant backs and signed plaques; 5 mm+ for presentation pieces and stamped jewellery components. Bigger is not always better — a clean small mark reads better than a struggle with an oversized one.
What do I strike it with?
A 1–2 lb brass mallet on a polished steel bench block. Do not use a steel hammer — it will deform the punch over time. One firm strike beats two soft ones for a clean impression.
How do I keep the punch sharp?
Polished punches stay sharp for thousands of strikes if you are hitting cleanly on a flat block. If the face starts blurring impressions, polish lightly with 600-grit emery, then a buffing mop on a polishing motor. Replace before the face deforms further.
Drop your email for a WELCOME5 code — £5 off orders over £30, plus monthly bench-tested tool picks and buying guides from our Birmingham workshop. About one email a month, no spam.
Almost there
Use code WELCOME5 at checkout
£5 off your first order over £30. Check your inbox and confirm your subscription to join the monthly Bench Journal.
Cookies. Essential cookies keep the shop running; with your consent we also use analytics & personalisation cookies to improve it.
Privacy policy · change anytime in the footer.
Maker's Mark Stamp — 5.0 mm Five-Pointed Star, Hardened Steel Design Punch, 60 HRC £7.99
Dapping & Doming Block — 1 x Heavy Duty Brass, 2.0 Inch Metal Shaping Tool for Beading £29.99
Stamp Safety Block, Wooden, 4.1 × 4.1 × 4.1 cm — for Round & Square Shank Stamps £7.99
Forming Stake No 3, Double Ended 9 Inch — Polished Hardened Steel, Synclastic & Anticlastic £29.99
