This disc cutter set allows you to punch four different mustache-shaped blanks from soft sheet metal. The set includes a solid steel die block and four corresponding punches, each machined from hardened carbon tool steel for clean, repeatable cuts.
To use, place your annealed sheet metal (up to 18 gauge) into the die, insert the desired punch, and strike firmly with a suitable hammer. Using a cutting lubricant will prolong the life of the cutting edges. The four punch sizes are: 5.55 x 13.8mm, 6.82 x 16.9mm, 8.43 x 20.87mm, and 10.22 x 24.87mm.
This tool is ideal for creating novelty jewellery components like pendants and charms, crafting custom decorative elements for models, or producing unique metal embellishments for mixed-media projects.
Cuts four distinct mustache shapes from non-ferrous sheet metal.
Includes punch sizes: 5.5x13.8mm, 6.8x16.9mm, 8.4x20.9mm, and 10.2x24.9mm.
Die block and punches are machined from hardened and tempered carbon tool steel.
Suitable for soft metals up to 18 gauge (1.02mm) like silver, copper, and brass.
Solid 76mm x 76mm (3" x 3") steel block provides a stable cutting base.
Only 5 left at the benchSame-day Birmingham dispatch on weekday orders before 2pm.
Our steel letter, number, and design punches are heat-treated to strike non-ferrous metals: silver (sterling, fine), copper, brass, bronze, aluminium, gold. Striking hardened steel will damage the face. For pewter and very soft alloys, use light strikes.
What size impression do I need?
1–2 mm for ring shanks and small pieces (initials, hallmark-style); 3–4 mm for pendant backs and signed plaques; 5 mm+ for presentation pieces and stamped jewellery components. Bigger is not always better — a clean small mark reads better than a struggle with an oversized one.
What do I strike it with?
A 1–2 lb brass mallet on a polished steel bench block. Do not use a steel hammer — it will deform the punch over time. One firm strike beats two soft ones for a clean impression.
How do I keep the punch sharp?
Polished punches stay sharp for thousands of strikes if you are hitting cleanly on a flat block. If the face starts blurring impressions, polish lightly with 600-grit emery, then a buffing mop on a polishing motor. Replace before the face deforms further.
Drop your email for a WELCOME5 code — £5 off orders over £30, plus monthly bench-tested tool picks and buying guides from our Birmingham workshop. About one email a month, no spam.
Almost there
Use code WELCOME5 at checkout
£5 off your first order over £30. Check your inbox and confirm your subscription to join the monthly Bench Journal.
Cookies. Essential cookies keep the shop running; with your consent we also use analytics & personalisation cookies to improve it.
Privacy policy · change anytime in the footer.
Steel Design Punch for 5.0 mm Five-Pointed Stars, 60 HRC Hardness £7.99
1 x Heavy Duty Brass Doming Dapping Block, 2.0 Inch Metal Shaping Tool for Jewellery Making and Beading £29.99
Wooden Stamp Holder Safety Block for Jewellery Making, Metal Marking, Round and Square Stamps, 4.1 x 4.1 x 4.1 cm £7.99
9 Inch Heavy Duty Large Double Ended Jewellery Making Forming Stake No 3, Hardened Steel, Synclastic and Anticlastic, Highly Polished £29.99
