Bench Pin & Metal Clamp, V Slot — 8-Inch Hardwood Sawing Platform for Jewellers

Nearly every sawing and filing job at the bench happens over a pin, and this one clamps to the bench edge in seconds — no permanent fixing needed. The V-slot supports rings and small work from both sides while the saw blade works in the gap, and the hardwood soaks up vibration that would otherwise chatter through the piece.

A heavy-gauge steel C-clamp with a hook-shaped handle tightens by hand, so the pin goes on and comes off without tools. Two circular holes through the top surface add extra utility. At 8 inches it gives a full working platform; re-dress the wood as it wears in — a used pin is a personalised one.

• Solid hardwood block with a V-slot to support rings and small pieces during sawing.
• Heavy-gauge steel C-clamp secures the pin firmly to the edge of your workbench.
• Large, hook-shaped handle on the clamp screw allows for quick, tool-free tightening.
• The wood construction helps to dampen vibration whilst you work.
• Features two circular holes drilled through the top surface for additional utility.

Who it's for

An essential tool for UK bench jewellers, watchmakers, and horologists who perform detailed sawing, filing, or setting work. Also suitable for model makers and hobbyists requiring a small, stable work platform.

Specifications

• Material: Hardwood, Steel
• Length: 8 inches (approx. 200mm)

Free UK delivery from £30 · Same-day dispatch target for orders before 2pm Mon–Fri · 30-day returns