Shield disc cutter set seen from above, four shield-shaped punches with scalloped tops seated in the square die by its screws

Blanking Punch & Die Set — Shield, 4 Steel Punches, 8-22 mm, Jewellery Making

£99.99
£99.99
Skip to product information
Shield disc cutter set seen from above, four shield-shaped punches with scalloped tops seated in the square die by its screws
  • Shield disc cutter set seen from above, four shield-shaped punches with scalloped tops seated in the square die by its screws
  • Shield disc cutter set at an angle, the four graduated punches standing in the two-plate steel die, sheet slot visible
  • Shield disc cutter set from the opposite corner, showing the pointed shield profile of each punch and the block screws
  • Dimension diagram of the four shield punches on a grid, outlines labelled from 8.14 x 12.45 mm up to 13.86 x 21.19 mm
  • Shield disc cutter set seen from above, four shield-shaped punches with scalloped tops seated in the square die by its screws
  • Shield disc cutter set at an angle, the four graduated punches standing in the two-plate steel die, sheet slot visible
  • Shield disc cutter set from the opposite corner, showing the pointed shield profile of each punch and the block screws
  • Dimension diagram of the four shield punches on a grid, outlines labelled from 8.14 x 12.45 mm up to 13.86 x 21.19 mm
Blanking Punch & Die Set — Shield, 4 Steel Punches, 8-22 mm, Jewellery Making

Blanking Punch & Die Set — Shield, 4 Steel Punches, 8-22 mm, Jewellery Making

£99.99
£99.99
Secure checkout
American Express Apple Pay Bancontact Diners Club Discover Google Pay Klarna Maestro Mastercard MB WAY PayPal Satispay Shop Pay Union Pay USDC Visa

Shield blanks in four graduated sizes — from 8.14 × 12.45 mm up to 13.86 × 21.19 mm — punched clean from sheet in a single hammer strike each. A quick way to keep pendant, earring and decorative components identical across a run, whether you work in silver, copper or brass; gold sheet cuts happily too.

The die block (63.5 × 88.9 mm) and all four punches are hardened, tempered carbon tool steel. Each punch is ground sharp at the cutting end and bevelled at the striking end; feed the die sheet no thicker than 18 gauge (1.02 mm), add a drop of cutting lubricant, and the edges will stay sharp through repeated use.

  • Cuts four distinct shield sizes from 8.14 mm up to 21.19 mm long.
  • Hardened carbon tool steel punches for clean cuts in non-ferrous sheet.
  • Solid steel die block measures 63.5 x 88.9 mm (2.5 x 3.5 inches).
  • Suitable for soft sheet metals up to 18 gauge (1.02 mm).
  • Punches are bevelled for hammer striking and have sharp cutting edges.
Weight 1.35 kg

Common questions at the bench

What metal and thickness can it cut?
Only the non-ferrous sheet metal this product's description names, and no thicker than any gauge or thickness it gives. Do not cut steel or any other ferrous metal: sheet that is harder or thicker than the cutter is made for can chip or blunt the punches and the die.
How do I cut a clean blank?
Anneal (soften) the sheet and put a little cutting lubricant on the punch. Stand the die block on a solid, flat surface, set the sheet in it and seat the punch with its cutting end to the metal. Strike the top of the punch squarely and firmly, with the hammer or mallet this product's description suggests if it names one; one firm, square blow gives a cleaner edge than several light or glancing ones.
Will the blank need finishing?
Check each blank. Smooth any burr or sharp edge with a file or fine abrasive paper before the piece is worn or finished, and if a blank has bowed slightly in the cut, flatten it with a mallet on a bench block.
How should I look after it?
Use it only on the sheet it is made for. Wipe the punches and die block clean after use, oil them lightly and store them dry, with the cutting edges kept from knocking against other tools. If a punch sticks, tap it back out straight rather than levering or twisting it.

More from Punches & Stamps

View all 117 →
  1. Five-pointed star metal punch, close-up of the raised star on the end of the steel shank, standing on linen
    Maker's Mark Stamp — 5.0 mm Five-Pointed Star, Hardened Steel Design Punch, 60 HRC £7.99
  2. Heavy duty 2-inch brass dapping block for metal shaping and silversmithing
    Dapping & Doming Block — 1 x Heavy Duty Brass, 2.0 Inch Metal Shaping Tool for Beading £29.99
  3. Stamp safety block in wood, a cube with a stepped slot cut into one top edge for round and square shank stamps
    Stamp Safety Block, Wooden, 4.1 × 4.1 × 4.1 cm — for Round & Square Shank Stamps £7.99
  4. Forming stake No 3, double-ended polished steel with concave grooves either side of the hexagonal centre, on cream
    Forming Stake No 3, Double Ended 9 Inch — Polished Hardened Steel, Synclastic & Anticlastic £29.99

You may also like